Lonseal Epoxy Adhesive 650

Lonseal Epoxy Adhesive 650

Regular price$72.00
/
Shipping calculated at checkout.

Size

Lonseal 650 Epoxy Adhesive is a wet set adhesive that is formulated for high performance installation of Lonseal flooring.

Features:

  • Wet set adhesive
  • CRI Green Label Plus Certified #GLP59909
  • Applications:
    • Properly prepared, non-porous substrates and existing vinyl floors
    • Locations with temperature extremes, such as saunas, cold-storage, or walk-in freezers
    • Areas where flooding is possible, including around drains, shower areas, public bathrooms, pool/whirlpool aprons, or laundry rooms
    • Areas expecting heavy point loading or heavy/dynamic rolling loads, like hospital beds
    • Can be used on properly prepared, non-porous substrates and existing vinyl floors

Application Information:

  • Adhesive must be applied by a trowel with 1/16" x 1/32" x 1/32" U-Notches (Model ZZ800 Trowel Sold Separately). These specs are specifically recommended by the adhesive MFG. If applied incorrectly the flooring will not lay properly.
  • Approx. Spread rate: 170 - 225 sq. ft./gal. *
  • Open time: Up to 15 minutes
  • Working time: Up to 15 minutes

Notes: Trowel sizes listed are by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.

*Actual job site spread rate will vary depending on the substrate conditions.

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.



Limitations: Protect from freezing. Use only when the substrate temperature is 65 °F – 85 °F (18.3 °C – 29.4 °C).

Physical Properties:

  • Color: Beige
  • Solids: 100%
  • VOC: 10 g/L (mixture)
  • Wt. /Gal.: 11.6 lbs./gal.
  • Shelf Life: 1year, when stored unopened

Storage Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C); keep dry and out of direct sunlight in a well-ventilated area.

Application Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C)

Container Size: 1 gal.

Concrete Requirements: 5 lbs./1,000 ft2/24 h max. MVER; 75% max. RH; 9 pH max.

Approximate Spread Rate:

Note: Trowel size listed is by width/depth/space. All information provided in the adjacent table will vary depending on job site conditions, including temperature, humidity, and substrate conditions.

*APPROXIMATE SPREAD RATE: Actual job site spread rate will vary depending on the substrate conditions.

†OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

‡WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied

  • to the substrate.
  • Up to 15 minutes†
  • Up to 15 minutes‡


U-notch Trowel:

  • 1/16″ x 1/32″ x 1/32″
  • 170 – 225 sq. ft./gal.*

Specifications:

  • Color: Beige
  • Solids: 100%
  • VOC: 10 g/L (mixture)
  • Part A: 916 U.S. gal.
  • Part B: .083 U.S. gal.
    • Part A bucket size is approximately 1.5 U.S. gallons
    • When Part A and B are combined the bucket will appear to be approximately 2/3 full
  • Wt. /Gal.: 11.6 lbs./gal.
  • Shelf Life: 1 Year, When stored unopened
  • Storage Conditions: 70 ° F 85 & (21.1 ° C 29.4 &)
    • Keep dry and out of direct sunlight in a well-ventilated area.
  • Application Conditions: 70 & 85 & (21.1 & 29.4 &)
  • Container Size: 1 gal.
  • Approx. Coverage Area: 170-225 Square Feet
  • Concrete Requirements: 5 lbs./1,000 ft2/24 h max. MVER; 75% max. RH; 9 pH max.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Recently viewed